Serving the Sacramento area  ·  (916) 249-2868  ·  Open Mon-Sun 7am-7pm
📞 (916) 249-2868 Free Quote

Metal Roofing in West Sacramento, CA (95605) · Local Professionals

Sacramento Metal Roofing · Fast response in West Sacramento and the Sacramento area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+266Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

West Sacramento is a city of two rivers and a lot of rooftops that have seen some weather. From the older river-side homes near the Sacramento River and the deep lots off Jefferson Boulevard to the newer subdivisions out toward Southport, the housing stock here ranges from mid-century ranch homes to 1990s stucco tracts, and each one has its own roofing quirks. The flat valley floor and the summer heat above 100 degrees are hard on shingles and fasteners, and the winter winds that come through the Delta can lift panels and open seams.

That is why homeowners in ZIP 95605 call Sacramento Metal Roofing. We know the older homes near the West Sacramento waterfront and the newer builds off Harbor Boulevard, and we have seen how the intense UV and the occasional storm can test a roof. If you are near the West Sacramento Recreation Center or just off the I Street Bridge, we can get to you quickly and give you a straight answer about what your roof needs.

Metal Roofing in West Sacramento (95605)

West Sacramento sits right where the Sacramento and American rivers meet, and that means the ground here is flat and the water table can be high in spots. Older homes in Broderick and Bryte often have shallow lots with mature trees that drop limbs and shade the roof, which can lead to moss and debris buildup. Newer homes in Southport and near the River Walk Park have steeper pitches and tighter side yards, so access can be a challenge. We plan for that by bringing the right equipment and sometimes using a crane or conveyor to get materials up without damaging your landscaping or your neighbor's fence.

Our team has worked on everything from small leak repairs on 1950s ranch homes to full standing seam installations on newer custom builds. We understand how the summer heat bakes sealants and makes fasteners back out, and we know that the winter winds can peel back panels if they are not fastened correctly. Whether you are near the West Sacramento Farmers Market or out by the Deep Water Ship Channel, we have the experience to handle your metal roofing project.

Our services in West Sacramento

How a Job Works in West Sacramento

Step 1: You call us at (916) 249-2868 or fill out our contact form, and we schedule a free on-site assessment. We will come out to your property in West Sacramento, inspect your roof, and talk through your options. We will check for leaks, loose fasteners, and any storm damage, and we will give you a written estimate before any work begins.

Step 2: Once you approve the estimate, we pull the necessary permits from the City of West Sacramento. We know the permit requirements for re-roofs and the inspection process, so we handle that for you. On the day of the job, our crew arrives on time, protects your landscaping with tarps, and gets to work. If your home is in an HOA, we can coordinate with them to make sure the panel profile and color meet their guidelines.

Step 3: After the work is done, we clean up thoroughly. We magnet-sweep for nails and debris, haul away all old materials, and do a final walkthrough with you to make sure you are happy with the result. We do not consider the job finished until you are satisfied.

Pricing for metal roofing in West Sacramento depends on the size of your roof, the material you choose, and the condition of your existing roof. For a typical 1,500 square foot ranch home, a metal roof installation starts around $8 per square foot, while standing seam runs about $10 per square foot. If you are replacing an existing roof, expect starting prices around $9 per square foot. For smaller repairs like leak fixes or flashing repairs, we start at $450. We also offer metal roof over shingles (retrofit) starting at $7 per square foot, which can save you money on tear-off and disposal. The best way to get an accurate price is to call us at (916) 249-2868 for a free estimate. We will assess your roof and give you a clear, no-obligation quote.

My home in Broderick has a low-pitch roof and the old shingles are curling. Can you install a metal roof over them?
Yes, we can often install a metal roof over your existing shingles if your roof structure can handle the weight and your local code allows it. In Broderick, many homes have low-slope roofs that are good candidates for a retrofit with standing seam or corrugated panels. We will inspect your roof deck and let you know if a retrofit is the right choice or if a full tear-off is needed.
A windstorm just lifted some panels on my roof near the West Sacramento waterfront. How quickly can you respond?
We understand that storm damage can be stressful. We offer free inspections for storm and wind damage and can usually get out to West Sacramento within 24 to 48 hours after a storm. Call us at (916) 249-2868 to schedule an inspection. We will secure any loose panels and provide a written estimate for repairs.
What is the typical cost for a metal roof repair in West Sacramento?
Most metal roof repairs in West Sacramento start around $450 for minor leak fixes or flashing repairs. More extensive repairs, like replacing multiple panels or fixing separated seams, can range from $750 to $1,500 depending on the scope. We always provide a free estimate before any work begins, so you know exactly what to expect.
Do I need a permit from the City of West Sacramento for a metal roof installation?
Yes, the City of West Sacramento typically requires a building permit for a full roof replacement or a re-roof. The permit process includes plan review and inspections to ensure the work meets building codes. We handle the permitting process for you and ensure all work is inspected and approved by the city.
My HOA requires a specific roof color. Can you help with the approval process?
Absolutely. We work with many HOAs in West Sacramento and can provide color samples and product specifications for your HOA's architectural review. We will coordinate with your HOA to ensure the panel profile and color meet their guidelines, and we can attend meetings if needed to help get approval.
Are you fully insured for roofing work in West Sacramento?
Yes, we are fully insured with both general liability and workers' compensation coverage. Your property is protected, and our team is covered in case of any accidents on the job.
How often should I have my metal roof inspected in West Sacramento?
We recommend having your metal roof inspected annually, preferably in the spring before the summer heat and in the fall before the winter rains. West Sacramento's intense UV can degrade sealants and cause fasteners to loosen, so a yearly inspection can catch small issues before they become leaks. We offer free inspections and can set up a maintenance plan for you.
Why choose us?

Trusted professionals in Sacramento

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Sacramento

All your work handled by qualified professionals in Sacramento

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

266+ Verified Client Reviews in Sacramento

⭐⭐⭐⭐⭐ 4.9/5 · 266 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Sacramento · Response within 24h · No commitment · ☎ (916) 249-2868

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Sacramento ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm