Serving the Sacramento area  ·  (916) 249-2868  ·  Open Mon-Sun 7am-7pm
📞 (916) 249-2868 Free Quote

Metal Roofing in Roseville, CA (95678) · Local Professionals

Sacramento Metal Roofing · Fast response in Roseville and the Sacramento area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+266Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Roseville's 1990s and 2000s subdivisions, from the concrete tile roofs off Pleasant Grove Boulevard to the older shingle roofs near Royer Park, are hitting the age where leaks and loose fasteners show up. The valley floor heat and hard summer sun bake sealants and back screws out, while winter storms test every flashing detail.

We are Sacramento Metal Roofing, and we work Roseville (95678) and the surrounding Sacramento area every week. From the family homes near Maidu Regional Park to the larger lots edging toward Granite Bay, we replace tired tile and shingle roofs with metal systems built for this climate, and we repair the leaks that show up after a windy storm.

Metal Roofing in Roseville (95678)

Roseville sits on the flat valley floor with the Sierra foothills rising to the east, and that matters for how a roof performs. Most of the housing stock here is stucco on wood frame with concrete tile or composition shingles, and the low-pitch roofs common in the older ranch and subdivision homes need careful underlayment and flashing work. Larger lots near the foothill edge often have detached shops, sheds, and barns where exposed-fastener R-panel or corrugated metal makes sense. The hard summer light and 100-degree days are the main enemy: they dry out sealants, cook shingles, and work fasteners loose, which is why we see so many active leaks through failed screws and separated seams. Winter rain and tule fog bring their own problems, especially at chimneys, skylights, and valleys where debris collects under the valley oaks and crape myrtles. We install standing seam in charcoal, tan, and light reflective finishes, stone-coated steel in a tile profile for HOA-friendly replacements, metal shingles, and copper accents on porches. Our team has been serving Roseville and the greater Sacramento area long enough to know which neighborhoods need a full tear-off and which can handle a metal-over-shingle retrofit.

Our services in Roseville

How a Job Works in Roseville

Step 1: you call (916) 249-2868 or request a free estimate, and we schedule an on-site assessment. We look at the roof, the attic if accessible, the flashing at chimneys and skylights, and the gutters, then we explain what we found and what a metal roof or repair would involve. No pressure, no vague numbers.

Step 2: we handle the work. In Roseville that often means pulling the roofing permit through the city, coordinating with your HOA on panel profile and color if you are in a subdivision with design review, and planning access around tight side yards and mature trees. For a replacement we tear off the old tile or shingles, inspect and repair the decking, install new underlayment, and set the metal panels or shingles with the correct fasteners and flashing details for our summer heat and winter rain.

Step 3: cleanup and final walkthrough. We magnet-sweep the yard and driveway, haul away all debris, and walk the finished roof with you so you can see the seams, flashing, and gutter connections. We leave your property clean and we do not consider the job done until you have had a chance to ask questions.

Pricing in Roseville depends on the size and pitch of your roof, the condition of the decking, access around the house, and how soon you need it done. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. A metal-over-shingle retrofit starts at $7 per square foot, corrugated and ribbed panel roofing at $5.50 per square foot, and stone-coated steel or metal shingle roofing at $9 per square foot. Repairs start at $450, leak repairs at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Gutters for metal roofs start at $9 per linear foot. If your roof is storm damaged, call us for a free inspection and we will document what we find for your insurance claim. For a free estimate on your Roseville home, call (916) 249-2868.

My 1990s Roseville subdivision has concrete tile roofs that are starting to leak. Is metal a good replacement, and will my HOA approve it?
Yes, metal is a strong replacement for aging concrete tile in Roseville subdivisions. Stone-coated steel in a tile profile is often the easiest path through HOA design review because it looks like tile from the street while weighing far less. We can provide product samples and specification sheets to submit to your HOA, and we coordinate the approval before we order materials.
A storm just blew through Roseville and lifted some panels on my roof. How fast can you respond?
Call (916) 249-2868 and we will schedule a free storm damage inspection as soon as possible. We can often tarp or secure an active leak the same day or next day, then give you a written scope for the permanent repair. We document the damage with photos so you have what you need for an insurance claim.
What does a typical metal roof replacement cost for a Roseville home, and what changes the price most?
Most Roseville replacements fall in the range of $9 to $10 per square foot for the metal roofing itself, but the total depends on roof size, pitch, how many layers need to come off, decking condition, and flashing complexity at chimneys and skylights. Access around tight side yards and mature trees can add labor. We give you a firm written estimate after the free on-site assessment.
Do I need a permit from the City of Roseville for a metal roof replacement, and can you pull it?
A full replacement or re-roof typically requires a permit from the City of Roseville, and the requirements and fees vary by project. We pull the permit for you and schedule the inspections. If your home is in an area with design review or historic considerations, we confirm those requirements with the city before work starts.
My neighbor's tree drops limbs on my roof and I want to replace it. What are the rules about the property line and my HOA?
Property line and tree questions are civil matters between neighbors, so we recommend documenting the issue and talking with your neighbor first. For HOA approval, we provide the panel profile, color samples, and installation details your architectural committee needs. We can also install snow guards and branch protection details to reduce future damage from overhanging limbs.
Are you fully insured for work at my Roseville property?
Yes. We carry general liability insurance and workers' compensation coverage for our crew.
What maintenance should Roseville homeowners do to keep a metal roof in good shape through the hot summers and wet winters?
Have the roof inspected once a year, ideally in early fall before the rains. We check fasteners for backing out, clear debris from valleys and gutters, and reseal any flashing details that have dried out in the summer heat. Keeping valley oaks and crape myrtle limbs trimmed back from the roof also prevents punctures and keeps debris from trapping moisture.
Why choose us?

Trusted professionals in Sacramento

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Sacramento

All your work handled by qualified professionals in Sacramento

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

266+ Verified Client Reviews in Sacramento

⭐⭐⭐⭐⭐ 4.9/5 · 266 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Sacramento · Response within 24h · No commitment · ☎ (916) 249-2868

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Sacramento ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm