Serving the Sacramento area  ·  (916) 249-2868  ·  Open Mon-Sun 7am-7pm
📞 (916) 249-2868 Free Quote

Metal Roofing in Galt, CA (95632) · Local Professionals

Sacramento Metal Roofing · Fast response in Galt and the Sacramento area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+266Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Galt is a farm town that still works for a living. The old downtown blocks around Fourth and C Streets have the same low-slung storefronts and mature shade trees they had when your grandparents drove through, while the newer subdivisions off Twin Cities Road and Highway 99 pack stucco homes with concrete tile roofs onto tight lots that bake all summer.

We're Sacramento Metal Roofing, and we've been up and down these streets enough to know that a Galt roof has to handle 100 degree afternoons, hard UV, and the occasional wind event that peels back a panel on a shop or barn out on the east side. If you're in 95632 and your roof is telling you something, call us at (916) 249-2868.

Metal Roofing in Galt (95632)

Galt sits on flat valley floor south of Sacramento, and that flat ground matters more than people think. Older homes near the downtown core often have low-pitch roofs that were built for composition shingles, and when you switch to metal you have to get the underlayment and ventilation right or you'll trap heat and moisture. On the newer side, the subdivisions off Marengo Road and near the Galt Community Park have concrete tile roofs that are now hitting the age where homeowners start asking about replacement, and a lot of those lots are tight enough that we're staging panels on the driveway and walking them up, not swinging them over the fence.

Then there's the agricultural side. Out toward Arno Road and the orchards east of town, we see a lot of exposed-fastener R-panel on barns, sheds, and workshops. Those roofs take a beating from sun and from tree limbs, and the fasteners back out over time. We also handle the commercial buildings along the Highway 99 frontage, where a leak over a retail space is a different kind of emergency. Our team has worked metal roofs across the Sacramento Valley, and we bring that experience to every Galt job, whether it's a 1920s bungalow near the old high school or a 4,000 square foot shop on the edge of town.

Our services in Galt

How a Job Works in Galt

Step 1: You call us at (916) 249-2868 or reach out online, and we set up a free on-site assessment. We look at the roof, the attic if we can get to it, the flashing, and the gutters. You get a written estimate with the scope spelled out, not a number scribbled on a business card.

Step 2: Once you approve, we pull the permit through the City of Galt building department and schedule the work. On older downtown homes we plan for the tight alleys and mature trees, and on HOA properties we confirm the panel profile and color before anything gets ordered. For a full replacement we usually tear off and install in stages so your house isn't open to the weather overnight.

Step 3: Cleanup is part of the job, not an afterthought. We magnet-sweep the yard and driveway for screws, haul off the old material, and walk the finished roof with you so you can see the seams, flashing, and penetrations before we call it done.

Pricing in Galt follows the same basic math as the rest of the Sacramento Valley, but the details move the number. A simple metal roof over shingles on a ranch home can start around $7 per square foot, while a standing seam install on a steeper roof with turrets or complex valleys runs from $10 per square foot and up. Full replacement typically starts around $9 per square foot, and repairs like a leak at a flashing or a failed fastener start around $450. What drives the cost is roof size and pitch, how many layers you're tearing off, access for the crew and materials, and how fast you need it done. If your roof is leaking right now, say so on the phone and we'll prioritize the call. Free estimates at (916) 249-2868.

My house is in the older part of Galt near the downtown core, and the roof has a low pitch. Can you still install metal?
Yes, but low-pitch roofs need attention. On older Galt homes we often use a standing seam or a ribbed panel with a proper high-temp underlayment and added ventilation, because a low slope doesn't shed heat or water the way a steeper roof does. We check the attic ventilation during the estimate so the new roof doesn't trap moisture.
A windstorm just peeled back some panels on my shop out by Arno Road. How fast can you get out there?
Call (916) 249-2868 and tell us it's storm damage. We treat active leaks and lifted panels as priority calls. We'll tarp or secure what we can the same day when possible, then give you a written repair estimate. We also document the damage with photos if you're filing an insurance claim.
What does a metal roof replacement cost on a typical three-bedroom Galt home?
For a standard single-story home in the 1,500 to 2,000 square foot range, most replacements land between $9 and $14 per square foot depending on the panel type, pitch, and how many old layers we remove. A standing seam roof on a more complex house will be at the higher end. We give you a firm number after the free on-site assessment.
Do I need a permit from the City of Galt for a metal roof replacement?
In most cases yes. A full replacement or re-roof generally requires a permit, and the City of Galt building department sets the fees and inspection schedule. Rules can vary depending on the scope, so we confirm the requirements with the city before we start. We handle the permit paperwork as part of the job.
My HOA has rules about roof colors. Can you help with that?
We can. Several Galt subdivisions have design review, and we'll get the panel profile and color approved before we order material. If your neighbor's tree hangs over the property line and drops limbs on your roof, that's a separate conversation, but we can document the damage and point out where the limbs are coming from so you have it in writing.
Are you fully insured for work on my Galt property?
Yes. We carry general liability insurance and workers' compensation coverage. We're happy to provide a certificate of insurance before we start, and we recommend asking any contractor for one before they get on your roof.
What should I do to maintain a metal roof in Galt between big jobs?
Keep the gutters clear, especially before the rainy season, and have the roof inspected every couple of years. In Galt the main issues are UV fading on the finish, fasteners backing out on exposed-panel roofs, and debris from valley oaks and sycamores. A quick inspection in early fall catches small problems before the winter rain finds them.
Why choose us?

Trusted professionals in Sacramento

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Sacramento

All your work handled by qualified professionals in Sacramento

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

266+ Verified Client Reviews in Sacramento

⭐⭐⭐⭐⭐ 4.9/5 · 266 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Sacramento · Response within 24h · No commitment · ☎ (916) 249-2868

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Sacramento ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm