Serving the Sacramento area  ·  (916) 249-2868  ·  Open Mon-Sun 7am-7pm
📞 (916) 249-2868 Free Quote

Metal Roofing in Rancho Cordova, CA (95742) · Local Professionals

Sacramento Metal Roofing · Fast response in Rancho Cordova and the Sacramento area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (916) 249-2868
+266Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Rancho Cordova grew up around the old Mather Field and the Aerojet plant, and its housing tells that story: mid-century ranches on low-slope composition roofs in Cordova Meadows and White Rock, and newer stucco tracts with concrete tile out toward Anatolia and Sunridge. The summer sun here is relentless, and those low-pitch roofs take the brunt of it.

Homeowners in Rancho Cordova (95742) call Sacramento Metal Roofing because we know how UV and heat bake shingles and back out fasteners on these roofs.

Metal Roofing in Rancho Cordova (95742)

Most of Rancho Cordova sits on flat valley floor, which sounds simple until you deal with drainage. Older neighborhoods like Cordova Meadows have narrow side yards and mature trees, so access for panels and equipment takes planning. Newer tracts in Anatolia and Sunridge have HOA design rules that can restrict panel profiles and colors, and we check those before we order material. The low-slope composition roofs common on 1950s to 1970s ranches are prime candidates for metal roof over shingles (retrofit) or a full replacement, because standing water and UV degrade shingles faster here than on steeper roofs. We also see corrugated and R-panel metal on barns, shops, and larger lots along the American River Parkway corridor, and those often need screw replacement and re-fastening after years of thermal movement.

Our team has installed and repaired metal roofs across Sacramento and the surrounding areas, including Rancho Cordova, Gold River, and Rosemont. We know the local building department requirements vary by jurisdiction, and we always defer to the city for permits and inspections.

Our services in Rancho Cordova

How a Job Works in Rancho Cordova

Step 1: You call (916) 249-2868 or request a free estimate online. We schedule an on-site assessment, usually within a few days, and walk the roof with you to identify the scope: full replacement, retrofit over existing shingles, or a targeted repair. We check attic ventilation and flashing details, because those matter as much as the panels.

Step 2: Once you approve the written estimate, we pull the permit if required by the city of Rancho Cordova and coordinate with your HOA if you are in a community like Anatolia. For tight lots in older neighborhoods, we stage materials on the driveway or street per city rules and use panel lifts where needed. Installation typically takes one to three days for a standard ranch home, depending on roof complexity and weather.

Step 3: We clean the site daily, magnet-sweep for nails, and do a final walkthrough with you to confirm the work and review care tips. We leave your property clean and your roof watertight.

Pricing in Rancho Cordova depends on roof size, pitch, access, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. A retrofit over existing shingles starts at $7 per square foot, which is often a good fit for low-slope ranch roofs. Metal roof repair and leak repair start at $450, screw replacement and re-fastening at $750, and coating and painting at $2.50 per square foot. Flashing and skylight repair starts at $600, and gutters for metal roofs start at $9 per linear foot. For a free estimate tailored to your home, call (916) 249-2868.

My 1960s ranch in Cordova Meadows has a low-slope composition roof. Can you install metal over it?
Yes, in many cases. A metal roof over shingles (retrofit) is common on low-slope ranches, but code limits the number of existing layers, and we check the deck condition first. We will tell you if a full tear-off is the better option for your roof.
A storm just blew some panels loose on my house near Mather. How fast can you respond?
We prioritize storm and wind damage calls in Rancho Cordova. Call (916) 249-2868, and we will schedule an inspection, often same or next day, to secure the roof and document damage for your insurance claim if needed.
What does a typical metal roof replacement cost for a 1,500 square foot home in Rancho Cordova?
For a basic replacement, expect roughly $13,500 to $18,000 depending on pitch, access, and panel type. Standing seam costs more, and repairs are much less. We provide a free written estimate after inspecting your roof.
Do I need a permit for a metal roof in Rancho Cordova, and can you help with HOA approval?
Most full replacements require a permit from the city of Rancho Cordova, and rules vary, so we confirm with the building department before starting. For HOA communities like Anatolia, we provide panel samples and specifications to help with design review.
My neighbor's tree drops limbs on my roof. What are the rules if a branch damages my metal roof?
In California, you can trim branches that overhang your property line, but you cannot enter a neighbor's yard without permission. If a limb damages your roof, document it and call us at (916) 249-2868 for repair. We can provide photos and a report for insurance or neighbor discussions.
Are you fully insured for work at my Rancho Cordova property?
Yes. We carry general liability and workers' compensation insurance.
What maintenance does a metal roof need in Rancho Cordova's heat and dust?
Check fasteners and seals annually, especially on low-slope roofs where thermal movement is hard on screws. Rinse panels and gutters in spring to remove dust and pollen. We offer inspections and screw replacement starting at $750 to keep your roof tight.

Nearby service areas

📍 Sacramento 95816📍 Elk Grove 95758📍 Roseville 95678📍 Folsom 95630
Why choose us?

Trusted professionals in Sacramento

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Sacramento

All your work handled by qualified professionals in Sacramento

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

266+ Verified Client Reviews in Sacramento

⭐⭐⭐⭐⭐ 4.9/5 · 266 verified Google reviews

Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Elk Grove

“We needed a metal roof on our hay barn out in Elk Grove and these guys knocked it out fast. The crew of four had the corrugated panels up in two days and cleaned up every last screw and scrap piece before they left. Way better than I expected for the price.”

Commercial & Agricultural Metal Roofing
Chris A.
⭐⭐⭐⭐⭐
CA
Chris A.
Sacramento

“We had a standing seam system put on the back porch addition of our Victorian and it looks like it was always meant to be there. The crew matched the color to our trim perfectly and the seams are dead straight. Honestly relieved it came out this clean since our house is a bit of an oddball.”

Standing Seam Metal Roofing
Jennifer M.
⭐⭐⭐⭐
JM
Jennifer M.
Davis

“Had the old rusted panels on our farm shed replaced with new red corrugated metal. They did about 2,000 square feet and finished a day ahead of schedule. Only gripe is they left a small pile of old fasteners by the fence that I had to haul off myself, but the roof itself is solid.”

Corrugated & Ribbed Panel Roofing
Tom D.
⭐⭐⭐⭐⭐
TD
Tom D.
Roseville

“Just had a full metal roof installed on our house in Roseville and I'm genuinely impressed. The crew was professional, showed up when they said they would, and walked me through the whole process. The house is noticeably quieter in the rain now, which I didn't expect.”

Metal Roof Installation
Michelle B.
⭐⭐⭐⭐⭐
MB
Michelle B.
Citrus Heights

“We had a leak around our roof vent pipe that two other companies couldn't figure out. Sacramento Metal Roofing resealed the flashing and replaced the boot in under an hour. No more drips after the last big storm, should've called them first.”

Flashing, Chimney & Skylight Repair
Robert M.
⭐⭐⭐⭐⭐
RM
Robert M.
Folsom

“We did a retrofit over our old shingles instead of a full tear-off, and it saved us a ton of money and time. They worked around our brick chimney carefully and re-flashed everything properly. The whole job on our 1,800 sq ft house took about three days and the yard was spotless afterward.”

Metal Roof Over Shingles (Retrofit)
Emily C.
⭐⭐⭐⭐⭐
EC
Emily C.
West Sacramento

“Went with stone-coated steel on our Tudor-style home because we wanted to keep that old-world look, and it turned out even better than the samples. The crew was respectful of all our landscaping and the detail work around the gables is beautiful. Neighbors keep asking who did it.”

Stone-Coated Steel Roofing
James P.
⭐⭐⭐⭐
JP
James P.
Rancho Cordova

“Had them replace the roof on our new build out in Rancho Cordova with a metal system instead of the tile we'd originally planned. Great communication from the estimate through the final inspection. Took a little longer than quoted because of some supply delays, but the finished roof is excellent.”

Metal Roof Replacement
Free Quote

Get Your Free Quote

Metal Roofing in Sacramento · Response within 24h · No commitment · ☎ (916) 249-2868

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Sacramento ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm