Serving the Sacramento area  ·  (916) 249-2868  ·  Open Mon-Sun 7am-7pm
📞 (916) 249-2868 Free Quote

Metal Roofing in Sacramento, CA (95816) · Local Professionals

Sacramento Metal Roofing · Fast response in Sacramento and the Sacramento area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+266Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Sacramento's older neighborhoods are full of steep Victorian gables, craftsman bungalows, and mid-century ranch homes, all baking under 100-degree summers and getting lashed by winter storm winds. Whether you're in a 1910s bungalow in East Sacramento or a stucco ranch in Arden-Arcade, your roof takes a beating.

Homeowners in 95816 and across the Sacramento area call Sacramento Metal Roofing because we know this city's housing stock and climate. We've replaced worn shingle and tile roofs from Land Park to Natomas, and we've repaired storm-damaged metal panels from Oak Park to Citrus Heights. If you're near McKinley Park or anywhere in between, we can help.

Metal Roofing in Sacramento (95816)

Sacramento sits on the flat valley floor where the Sacramento and American rivers meet, about 30 feet above sea level. That flat terrain means drainage relies on gutters and downspouts, not natural slope, so we pay close attention to how water leaves your roof. Older neighborhoods like Midtown, Alkali Flat, and Boulevard Park have tight lots with mature valley oaks and sycamores that drop limbs and shade roofs, which can trap moisture and hide damage. In East Sacramento and Curtis Park, you'll find 1910s-30s bungalows and Period Revival homes with steep gables and turrets that need careful flashing and custom metal work. Out in Arden-Arcade, Carmichael, and Rancho Cordova, low-pitch composition roofs on 1950s-70s ranches are prime candidates for a metal retrofit. And in newer subdivisions like Natomas and Elk Grove, concrete tile roofs are common, and we often install stone-coated steel or standing seam to match the original look. The hard summer sun bakes sealants and backs out fasteners, while winter storm winds can lift panels and tear flashing. We've seen it all, and we build roofs that handle both extremes.

Our team has been serving Sacramento and the surrounding areas for years, and we understand the local building department requirements, historic district design review, and HOA rules that can affect your project. We're fully insured with general liability and workers' compensation, so you're protected.

Our services in Sacramento

How a Job Works in Sacramento

Step 1: Call us at (916) 249-2868 or fill out our online form to schedule a free on-site assessment. We'll inspect your roof, discuss your options, and provide a written estimate. We'll also help you understand if permits are needed and what your insurance might cover.

Step 2: Once you approve the estimate, we schedule the work. In Sacramento, permit timing varies by jurisdiction, and we handle the paperwork. For tight lots in Midtown or East Sacramento, we plan material delivery and staging to minimize disruption. If your home is in a historic district or HOA, we coordinate design review and color approvals.

Step 3: After installation, we clean up thoroughly, haul away all debris, and do a final walkthrough with you. We make sure you're satisfied and that your property is left clean. We also provide maintenance tips to keep your metal roof performing for decades.

Metal roofing costs in Sacramento depend on the material, roof size, access, and condition. For a typical 1,500-square-foot ranch home, metal roof installation starts around $8 per square foot, while standing seam starts at $10 per square foot. Replacement over existing shingles starts at $9 per square foot, and a retrofit over shingles starts at $7 per square foot. Corrugated panel roofing is our most economical option at $5.50 per square foot. Repairs start at $450, and screw replacement or re-fastening starts at $750. Coating and painting start at $2.50 per square foot. These are ballpark figures; your exact price depends on factors like roof complexity, number of penetrations, and urgency. Call us at (916) 249-2868 for a free estimate tailored to your home.

My 1920s bungalow in East Sacramento has a steep gable roof with original shingles. Can you install metal without removing the old shingles?
Yes, we can often install a metal roof over your existing shingles if your roof structure can handle the added weight and your local code allows it. Sacramento code limits the number of layers, so we'll check the current layers and structural condition during our free inspection. For older homes, we often recommend a full tear-off to inspect the decking and address any hidden issues.
A storm just blew through Natomas and lifted some panels on my metal roof. How quickly can you respond?
We prioritize storm damage calls. Call us at (916) 249-2868, and we'll schedule an inspection as soon as possible, often within 24 to 48 hours. We'll secure the roof to prevent further damage and provide a repair estimate. We also document the damage for your insurance claim.
What's the average cost to replace a shingle roof with metal on a 1,200-square-foot home in Land Park?
For a 1,200-square-foot home, a basic corrugated metal roof might start around $6,600 (at $5.50 per square foot), while a standing seam roof could start around $12,000 (at $10 per square foot). The exact price depends on roof pitch, complexity, and whether we need to remove existing layers. We provide free estimates with detailed pricing.
Do I need a permit to install a metal roof in Sacramento?
Yes, roofing permits are typically required for a full replacement or re-roof in Sacramento. Requirements vary by jurisdiction, so we recommend checking with the City of Sacramento website or contacting the building department. We handle the permitting process for you and ensure your project meets all local codes.
My HOA requires a specific roof color and profile. Can you help with approval?
Absolutely. We work with HOAs regularly and can provide product samples, color chips, and specifications for your HOA's design review. We'll coordinate with your HOA to ensure the metal roof meets their guidelines before installation.
Are you fully insured for roofing work in Sacramento?
Yes, we carry general liability insurance and workers' compensation coverage. We're happy to provide certificates of insurance upon request so you can verify our coverage before work begins.
What maintenance does a metal roof need in Sacramento's climate?
In Sacramento, we recommend an annual inspection, especially after winter storms. Check for loose fasteners, debris buildup in valleys and gutters, and any signs of sealant wear. We offer maintenance plans and can re-tighten fasteners and apply protective coatings to extend your roof's life.
Why choose us?

Trusted professionals in Sacramento

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Sacramento

All your work handled by qualified professionals in Sacramento

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

266+ Verified Client Reviews in Sacramento

⭐⭐⭐⭐⭐ 4.9/5 · 266 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Sacramento · Response within 24h · No commitment · ☎ (916) 249-2868

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Sacramento ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm