Serving the Sacramento area  ·  (916) 249-2868  ·  Open Mon-Sun 7am-7pm
📞 (916) 249-2868 Free Quote

Metal Roofing in Lincoln, CA (95648) · Local Professionals

Sacramento Metal Roofing · Fast response in Lincoln and the Sacramento area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+266Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Lincoln still feels like a small town, but the new subdivisions off Twelve Bridges Drive and the rural lots out toward Mount Pleasant Road keep our crews busy with metal roofs. You see everything here from single-story ranch homes on half-acre parcels to brand-new stucco houses with concrete tile, plus a fair number of shops and barns on larger rural-edge properties. The open sky and full sun out this way are hard on any roof.

That is why homeowners in Lincoln (95648) call Sacramento Metal Roofing. We know how the afternoon wind picks up across the valley floor and how the summer sun bakes sealants and works fasteners loose. Whether you are near McBean Park or out past the Lincoln Airport, we give you a straight answer and a roof that holds up.

Metal Roofing in Lincoln (95648)

Lincoln sits at the edge of the valley floor where the land starts to roll toward the foothills, so properties here get more wind and sun than neighborhoods closer to downtown Sacramento. New subdivisions off Twelve Bridges Drive and Joiner Parkway have tight lots and HOA design rules, while rural-edge properties on Mount Pleasant Road or Wise Road have shops, barns, and outbuildings with exposed-fastener R-panel roofs that take a beating from UV and wind. The ground can be hard and rocky in places, which affects how we stage materials and anchor ladders. Drainage matters too: a fast summer thunderstorm can send water off a low-pitch patio cover or shop roof right toward a foundation if the gutters and flashing are not right.

Our team has worked metal roofs across Lincoln and the surrounding Sacramento area for years. We have installed standing seam on new construction, replaced failed R-panel on rural shops, and repaired leaky fasteners on homes near the Lincoln Hills golf community. We know what the local building department looks for and how to work with HOA design review so your project does not stall.

Our services in Lincoln

How a Job Works in Lincoln

Step 1: You call (916) 249-2868 or request a free estimate online. We schedule a time to walk your property, look at the existing roof, check the flashing and fasteners, and talk through options. If you are in an HOA, we ask for the design guidelines up front so we can flag any color or profile restrictions before you commit.

Step 2: Once you approve the scope and price, we pull the permit if one is required and order materials. In Lincoln, tight subdivision lots mean we often stage panels on the driveway or street and use a conveyor or crane to get them up. On rural properties, we plan around gates, animals, and gravel drives. We keep the work area organized and protect landscaping as much as possible.

Step 3: When the job is done, we clean up thoroughly. That means magnet sweeps for screws and metal shavings, hauling away old roofing, and a final walkthrough with you to check the finished roof, gutters, and flashing. We do not leave until you are satisfied and the site is clean.

Pricing in Lincoln depends on the size and pitch of your roof, how many layers are already there, access, and the condition of the decking and flashing. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, and metal roof replacement around $9. If you are going over existing shingles with a retrofit, that starts around $7 per square foot. Smaller jobs like a metal roof repair or leak repair start around $450, and screw replacement or re-fastening starts around $750. Corrugated and ribbed panel roofing is the most economical at around $5.50 per square foot. We give free estimates, so call (916) 249-2868 and we will walk your roof and give you a written price with no pressure.

My house is in the Twelve Bridges area and the HOA has strict rules. Can you help with approval for a metal roof?
Yes. We work with HOA design review committees in Lincoln regularly. We can provide product specs, color samples, and profile drawings that match what your HOA requires. Just give us the guidelines and we will make sure the submittal is complete before we order materials.
A windstorm just lifted some panels on my shop out on Wise Road. How fast can you get out there?
Call us at (916) 249-2868. For storm and wind damage in Lincoln, we offer a free inspection and can usually get a crew out within a day or two to secure the roof and prevent further water damage. We document everything for your insurance claim.
What does a typical metal roof replacement cost for a 1,800 square foot ranch home in Lincoln?
For a home that size with a standard pitch and one layer of old shingles, a metal roof replacement often lands somewhere between $14,000 and $22,000 depending on the panel type, access, and whether any decking needs repair. Standing seam runs higher, corrugated panel lower. We give you an exact written estimate after a free on-site inspection.
Do I need a permit from the City of Lincoln for a metal roof replacement?
In most cases, yes. The City of Lincoln Building Department typically requires a permit for a full re-roof or replacement, and the requirements can vary based on the scope of work. We handle the permit application and inspections for you, and we always confirm current rules with the city before starting.
My neighbor's tree drops limbs on my roof and we are not sure where the property line is. Can you help with a metal roof repair near the fence?
We can repair the roof, but property line disputes are a civil matter. We will stay on your side of the line and document the damage. If branches are overhanging, we recommend talking with your neighbor or checking your plat map before any work begins. For HOA properties, we can also coordinate with the architectural committee if the repair is visible from the street.
Are you insured for work on my Lincoln property?
Yes. Sacramento Metal Roofing is fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Lincoln's climate?
The main thing is checking fasteners and sealant washers every few years, especially on exposed-fastener roofs. The summer heat and UV can dry out washers and back screws out slightly. We recommend a free inspection after any big wind event and a quick look at flashing around chimneys and skylights each fall before the rains. Keeping gutters clear of leaves from the valley oaks and elms also helps prevent water backup at the eaves.
Why choose us?

Trusted professionals in Sacramento

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Sacramento

All your work handled by qualified professionals in Sacramento

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

266+ Verified Client Reviews in Sacramento

⭐⭐⭐⭐⭐ 4.9/5 · 266 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Sacramento · Response within 24h · No commitment · ☎ (916) 249-2868

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Sacramento ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm